- Capable of storing up to 16 different sealing recipes.
- Touchscreen interface password protected
- Composed of : 5163 Sealing Head + 5160 Sealer Controller
- Create uniform seal for extra-large TPE tubing sizes
The SEBRA 5160-series TPE Tubing Sealer was created to make leak-free, permanent seals on the extra-large sizes of TPE tubing.
This new sealer allows you to seal without reducing fittings as it is performed currently with smaller machines.
The 5160 Sealer Controller has a touchscreen interface and a password-protected ADMIN mode. The sealing parameters can be adjusted when necessary to accommodate any process variables that may occur. The controller stores up to 16 different sealing recipes.
The 5163 Sealing Head is connected to the 5160 Sealer Controller by an 8-foot cable and air hose assembly. Tube diameter-specific guides position the tubing precisely and securely to create uniform seals. A safety cover protects users from exposure to the heat required to seal this larger tubing. It must be in the correct position to allow a sealed cycle to start. A hanging feature allows the sealing head to be hung off a rack for mobile use.
9″ x 16.5″ x 6″
(22.5cm x 41cm x 15cm)
13″ x 5.5″ x 9″
(50cm x 28cm x 27 cm)
|Operating Weight||14 lbs (6.35kg)||12 lbs (5.4 kg)|
|Compressed Air Requirement||70psi (4.83 bar) dry, filtered|
|User Interface||Touchscreen HMI|
|3/4″ x 1-1/8″ ,|
3/4″ x 1-1/4″
1″ x 1-3/8″
1″ x 1-1/2″
|Approximate Cycle Time||5 to 8 mins, tube type and size-dependent|
|Certifications||CE, RoHS, WEEE|
|Clean Room Compatibility||ISO7|