Crimp hose fitting Elbow 90°

Tri-Clamp crimp fittings with 90° angle


  • meterial Standard: 1.4404 Stainless steel, Optional: 1.4435 Stainless steel and (2.4602) Hastelloy C22
  • fitted with a crimp fitting
  • connection type: Tri-clamp
  • SF1 standar surface finish, SF4 on request





SF1, SF4


316L (1.4404), 316L (1.4435), C22 (2.4602)




Tri-Clamp crimp fittings with 90° angle are designed to connect hoses in an angle without the need for the hose to bend. The crimp fittings are crimped around the hose, ensuring a strong and durable connection. Suitable for hose sizes ½" up until 2 1/2"


The crimp fittings normally have the same tri-clamp connection size as the size of the hose, which means that a crimp fitting on a ½” hose will also have a ½” tri-clamp connection. Different tri-clamp connection sizes than the hose size are availabe on some sizes, shown in the table. Crimp fitting are available with SF1 or SF4 finish, although SF4 finish on 2½ crimp fittings  is only available on request.


A crimp fitting consists of two stainless steel parts, a hose-end with a connection (e.g. tri-clamp) and a sleeve that crimps the connection around a hose. The hose is enclosed between the two stainless steel parts of the crimp fitting without affecting the physical features of the hose. The passage between the hose and fitting will remain smooth during this process. The most aseptic and good cleanable connection!

Both ends of the hose are fitted with a crimp fitting, which are assembled very precisely in our workshop with our modern hose crimping machine. Want to know more about crimp fittings and this process? Read our Academy article about crimp fittings here.

Technical information

SizesSee table
Connection typeTri-Clamp
  • Standard: 1.4404 Stainless steel
  • Optional: 1.4435 Stainless steel and (2.4602) Hastelloy C22
Certificates (standard)FDA, USP Class VI, 3.1 material, surface finish certificate
Certificates (optional)Pressure test certificate